Wafer handling products

Manual Single Wafer Presenter 150 mm (6”)

Wafer handling products

Manual Single Wafer Presenter 150 mm (6”)

Choose your size:
Edge Only Wafer Contact
Scratch Reduction Tool
Use with WHS-V1-AP4BST Insert Prevention Vacuum Tip
Geared Wafer Selector
Interlocked Lift Lever
ESD-safe Construction
Portable with Transport Handles

Applications:

  • Wafer inspection - Wafer presenters are used to hold and rotate wafers during inspection, allowing for automated and consistent macro analysis of wafer surfaces and features.  Commonly seen in raw wafer production, post-epitaxial inspection, glass wafer haze, scratch, macro defect inspection, and lot process integrity inspections in Photolithography (photoresist) and Probe/Test areas (inking). 
  • Scratch reduction - Scratches on wafers can occur during handling and can result in defects and yield loss. Wafer presenters are designed to lift the wafer up from its cassette, allowing operators to access and handle the wafer without having to physically go between the wafers inside the cassette. This eliminates the need for operators to manually manipulate the wafer and reduces the risk of damage or contamination.

The WHS-P4601 is a manual single wafer presenter, designed for 150 mm (6”) diameter wafers. The WHS-P4 fully lifts a single wafer above a cassette and presents to an operator for easy removal without scratching neighboring wafers. Constructed with antistatic materials, the WHS-P4 is built to meet the strict ISO 4 (FS209E Class 10) standards, ensuring the highest level of protection for your wafers.

Other products of interest

wafer-handling
WHS-P1-601
Auto wafer presenter
Wafer handling products
Automatic single wafer presenter (WHS-P1) 150 mm (6”)
Automatic
150 mm (6”)
25-Slots
wafer-handling
WHS-A1-601
Automatic Flat Aligner
Wafer handling products
Automatic flat aligner (WHS-A1) 150 mm (6”)
The WHS-A1 Serie AFEZ Advanced technology automatic wafer flat aligner for alignment from 76 mm up to 150 mm wafers.
150 mm (6”)
Antistatic Polyoxymethylene 
Antistatic Polyurethane
ISO 3 (Class 1 FS209E)
WHS-SP-A1/A2/A5-R6_1
wafer-handling
WHS-G1-6
Wafer Edge Pick
Wafer handling products
Mechanical Wafer Pick Edge grip 150 mm
WHS-G1 Serie MCP2-8 A normally closed (consistent-Force) edge exclusion mechanical pick For handling 50 mm up to 200 mm round substrates from the wafer edge.
150 mm
Antistatic PEEK
Perfluorocarbon elastomer
Normally closed
ISO 4 (Class 10 FS209E)
wafer-handling
WHS-V2-SET200
Vacuum Wand Sets
Wafer handling products
Vacuum wand set 150-200 mm (WHS-V2)
The WHS-V1 Serie VWSET-B is a prepackaged vacuum wand set includes everything needed to start handling 150-200mm SEMI standard wafers safely using a house vacuu
150-200 mm