Wafer handling products
Economy manual flat aligner with dual knob (WHS-A6) 76 mm (3”)
Wafer handling products
Economy manual flat aligner with dual knob (WHS-A6) 76 mm (3”)
Choose your size:
Antistatic Construction With Wafer and Cassette Ground Paths
Economic Top/Bottom Flat Aligner
Easy Mainentance Quick-Disconnect Roller
Applications:
- Alignment - Wafer flat and notch aligners are used in the semiconductor industry to ensure that wafers are oriented correctly during various processes, such as lithography, deposition, and etching. The flat aligner has a notch or flat that corresponds to the orientation of the wafer's crystal lattice structure. This is critical because the orientation of the wafer affects the performance and functionality of the final semiconductor device.
- Lot integrity - Aligners are also used in the semiconductor industry to aid operators in performing lot integrity checks. By rotating the wafer scribe, which is the identification marking on the wafer's edge, to be visible to the operator, the operator can verify that the correct lot of wafers is being loaded into a production tool. This is an important step in preventing errors and ensuring consistent product quality.
- Edge inspection - Wafer flat and notch aligners are also used in the semiconductor industry to inspect wafers for edge defects. This macro inspection procedure is usually done under a light source and involves examining the edges of the wafer for any chips, cracks, or other imperfections. This is an important step in preventing wafer breakage during subsequent processing steps, as edge defects can weaken the wafer and cause it to break or fail. By using wafer flat and notch aligners to identify and inspect these defects, operators can take steps to prevent further processing of defective wafers and avoid costly production delays.
The WHS-A5-301 is an economical antistatic flat aligner for top/bottom alignment of 76 mm primary wafer flats. Features advanced abrasion resistant, static dissipative stage and roller materials. Low maintenance and long life. ISO Class 4
Brand
Wafer handling products
Product Number
WHS-A5-301
Remarks
*** NOTE: Please specify cassette model number(s) when ordering ***
Material
Anti-Static POM/Anodized Aluminum
Wafer Sizes
76 mm (3”)
Base material
Manual system
Roller material
Up to 25
Cleanliness
Anti-Static PU
Replacement Roller
Better than +/- 1°
Replacement notch roller
4
Status
Request information
Other products of interest
wafer-handling
WHS-A1-401
Automatic Flat Aligner
Wafer handling products
Advanced technology automatic wafer flat aligner for alignment of 100mm wafers. Engineered for InP, GaAs, GaN and SiC compound wafer handling. Features motorize
100 mm (4”)
Antistatic Polyoxymethylene
Antistatic Polyurethane
ISO 3 (Class 1 FS209E)
WHS-SP-A1/A2/A5-R6_1
wafer-handling
WHS-A2-601
Manual Flat Aligner
Wafer handling products
Advanced technology manual wafer flat aligner for top/bottom alignment of 150mm wafers. Engineered for InP, GaAs, GaN and SiC compound wafer handling. Features
150 mm (6”)
Manual system
Up to 25
Anti-Static PU
Better than +/- 1°
4
wafer-handling
WHS-T3-601
Manual Slide Transfer
Wafer handling products
The T3 series 150 mm (6") is a precision manual horizontal bulk wafer slide transfer for safely transferring wafers between two SEMI compliant wafer casset
150 mm (6”)
Manual System
Up to 25
ESD-safe polyoxymethylene
ISO 4
wafer-handling
WHS-V6-200
Cordless Portable Wand
Wafer handling products
The WHS-V6 Serie FWCR2 is a dvanced technology 150-200 mm cordless portable battery-powered vacuum wand allows independance from vacuum lines. Provides mobility
100-200 mm
Including: WHS-V1-AP4NST PEEK Vacuum Tip