- For 8" (200mm) wafers
- Material: Polypropylene (ESD-Safe)
- Anti-Static and Chemical Resistant
- 3 mm front side contact with performance elastomer strip
- With knife edge!
- Max temp: 100°F
MCP2 wafer edge handling tool
The MCP2 serie is a normally closed, outside diameter wafer edge handling tool. The soft gripper will touch only 3mm on the frontside of the wafer. The MCP2 is made from antistatic, chemical resistant ESD safe polypropylene and has a high temperature, chemical resistant perfluoroelastomer touch strip built into the design of the tool. This special touchpad helps to reduce scratches and edge chipping common with standard tweezers use. All MCP2 designs are available with or without a knife edge spatula feature for lifting wafers off of a flat surface. The 300mm version, MCP-12-001 is manufactured with ESD safe PEEK material.